Banner C-GAGE SLC1 Series Label Sensors Manuel d'utilisateur télécharger pdf

Datasheet

• No user adjustments – Adaptive Digital Logic (ADL

™

)

provides

revolutionary self-learning capability.

• Continuous automatic internal adjustment of sensing threshold and drift

compensation.

• Registration accuracy of ± 0.3 mm (0.012") typical at web speeds up to

1.5 m per second (5 ft per second)

• Reliably detects the presence of most types of labels on web backing

◦ Clear labels on an opaque backing

◦ Clear labels on a clear backing

◦ Opaque labels on an opaque backing

◦ Opaque labels on a clear backing

• Perfect for label-registering applications, and also for label-counting tasks

in slitting or rewinding applications.

• Heavy-duty metal housing, 1 mm (0.04") slot

Model Number

Supply Voltage Cable Output Type User Adjustments

SLC1BB6

10 to 30 V dc

5-wire 2 m (6.5 ft)

Bipolar (NPN and PNP) None Required

SLC1BB6Q 5-pin Euro-style (QD)

To order the 9 m (30 ft) cable models, add the suffix “W/30” to the model number of the cabled version (e.g., SLC1BB6

W/30). A model with a QD connector requires an accessory mating cable.

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Overview

Figure 1. SLC1 Label Sensor Features

1. Green power LED

2. Amber output LED

3. 1 mm (0.04 inch) slot

4. Web alignment guides

The SLC1 Series Label Sensor was developed to provide trouble-free

detection of labels on web backing material. It reliably senses the

difference between materials of extremely low visual contrast, including

clear labels on clear or opaque backing. The SLC1 uses Banner’s

exclusive Adaptive Digital Logic (ADL

™

) to automatically make all sensor

settings; no user adjustments are necessary.

NOTE: Labels with metallic inks, foil embossing or

metal substrates are not recommended for use with

SLC1 Series sensors.

Patent pending

C-GAGE SLC1 Series Label Sensor

Original Document

59369 Rev. B

20 March 2014

59369

1 2 3 4 5 6

Résumé du contenu

Page 1 - Datasheet

Datasheet• No user adjustments – Adaptive Digital Logic (ADL™)1 providesrevolutionary self-learning capability.• Continuous automatic internal adjustm

Page 2 - Less Repeatability

Installing the SLC1 Series Label SensorFigure 2. Allowing the web to glide over the bottom fork with slighttension lessens the effects of web flutter.

Page 3 - Maintenance

Reset ProcedureFigure 4. For best repeatability, align the labels' flat sides betweenthe sensor's web alignment guidesResets are performed a

Page 4 - Specifications

Wiring DiagramsOutputs ON during gap (Turn OFF at leading edge oflabel)Outputs ON during label (Turn ON at leading edge oflabel)bnwhbu+–bkgy*LoadLoad1

Page 5 - Dimensions

DimensionsRemove 4 screws for cleaning.Use 7/64" hex keyClearance forM4 (#8) screws(2 holes)10.2 mm(0.40")25.4 mm(1.00")3.8 mm(0.15&quo

Page 6

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS ORIMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCH

Commentaires sur ces manuels

Pas de commentaire

Banner C-GAGE SLC1 Series Label Sensors Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Capteurs Banner C-GAGE SLC1 Series Label Sensors. Banner C-GAGE SLC1 Series Label Sensors User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Banner C-GAGE SLC1 Series Label Sensors